Click Add to Cart to order this product.
Email: sales@naturalchoicewater.com.au with any questions about this or any of our other products.
Email: sales@naturalchoicewater.com.au with any questions about this or any of our other products.
Waterworks D5 Series Benchtop POU Water Cooler
 |
| Click to enlarge image(s) |
Large Integral reservoir (12 Litres).
Easily Cleaned and Sanitised
Available as Hot and Cold or Cool and Cold
2 Year Comprehensive Warranty
See Also
| Features | Benefits |
| Cabinet | Top and front panels are moulded of UV treated ABS and side panels are zinc coated steel sheets covered in electrostatically applied high polymer polyester resin. |
| Colour | High gloss cloud white available as standard. |
| Drip Tray | Concealed lift-out design of a high impact durable plastic. Removable for sanitation, it incorporates an anti-splash grid which diverts drain water into the drip tray |
| Taps | High impact polypropelene lever type. Fast flow and easy to operate. They're assembled directly onto the reservoir and are fully recessed for added protection. Taps are 177mm above the drain grid allowing ample room for filling kettles and other tall objects. Hot tap has safety influence |
| Top | One piece heat resistant plastic. This rust-proof top provides a flat surface to hold small coffee servers and trays |
| Function Status Display | Waterworks unique design. This exclusive device illuminates a red green signal indicating the power/hot/cold position of the dispenser |
| Cooling Reservoir | Constructed of polypropelene plastic, approximately 12 litres in capacity. The reservoir features large radius corners to faciltate cleaning. The intergrated zoned waterway and baffle system prevents ice rings from restricting chilled water flow. Cold water capacity below the baffle is 4.2Litres. Water above the baffle stays at or about room temperature. |
| Hot Tank | Type 304 stainless steel. 500 Watt sheathed heater installed in the tank ensures accurate temperature control. On/Off switch is easily accessible at side of cabinet. Tank capacity is 2 litres. |
| Air Filter | Located on the float assembly for easy access. The air filter contains a replaceable filter disc with a one micron membrane media |
| Float Assembly | One stage polyethlene float valve system incororates a primary float valve which maintains the water level in the reservoir and shuts off when full. The system is designed to operate on an incoming water pressure range of 140-700kPa and a pressure limiting valve should be fitted in situations where the mains pressure may fluctuate to greater than 700kPa |
| Refrigeration System | Ozone friendly HFC-134a refrigerant. Flow is controlled by capillary tube which has no moving parts. Condensor is air cooled static type for silent running. No fan assembly is required. Compressor is hermetically sealed, permanently lubricated and protected against motor overload. |
| Thermostat | Adjustable and user friendly. Readily accessible at the side of the cabinet. |
| Electrical | 240 Volts 50Hz single phase. A 1.8 metre house cable and 3 pin plug is supplied. Full load current is 1.5 amps |
| Dimensions | 310mm W x 310 mm D x 630mm H |
| Warranty | The Warranty provides 2 years comprehensive parts and labour coverage, for the period of 2 years from the date of sale. |
Search by Keyword
Shopping Basket
| Items: | 0 |
| Subtotal: | $0.00 |
Note: All prices in Australian Dollars
Free Shipping (Sydney, Melbourne, Brisbane only)
 |
 |
 |
Copyright © Natural Choice Water Pty Ltd
admin@naturalchoicewater.com.au