Add to Cart
Waterworks Alpine POU Water Cooler

Waterworks Alpine POU Water Cooler

Waterworks Alpine POU Water Cooler
Click to enlarge image(s)
Stainless Steel Reservoir
Attaches Directly to your Water Source
Available as Cool & Cold or Hot & Cold
100% Rust Proof moulded cabinet
2 Years Comprehensive Warranty
Specifications
Dimension 320mm W x 330 mm D x 1170mm H
Features Benefits
Cabinet Moulded form white-pigmented plastic, the cabinet of the Waterworks Alpine Series Cooler are 100% rust proof, UV stabilised and impact resistant. Minor scratches are disguised because the pigmentation is uniform throughout the depth of the cabinet material and the body consists of a single piece providing ideal serviceability and refurbishment capability.
Drip Tray Concealed lift-out design of a high impact durable plastic. Removable for sanitation, it incorporates an anti-splash grid
Taps High Impact polypropelene lever type. Fast flow and easy to operate. They-re assembled directly onto the reservoir and are reccessed for added protection. Taps are far enough above the drain grid to allow ample room for filling kettles and other tall objects. Hot tap has safety influence.
Top One piece heat resistant plastic. This rust proof top provides a relatively flat surface to hold small coffee servers and trays
Cooling Reservoir Constructed of stainless steel, approximately 4.9 Litres in capacity. The reservoir features large radius corners to facilitate cleaning. the intergrated zoned waterway and baffle system prevents ice rings from restricting chilled water flow. Cold water capacity below the baffle is 4.2Litres. Water above the baffle stays at or about room temperature.
Hot Tank Type 304 stainless steel. 500 Watt sheathed heater installed in the tank ensures accurate temperature control. on/off switch is easily accessible at the rear of the cabinet. Tank capacity is 2 litres.
Air Filter Located on the float assembly for easy access. The air filter contains a replaceable filter disc with a one micron membrane media.
Float Assembly Dual stage polyethylene float valve system incorporates a primarry float valve which maintains the water level in the reservoir and shuts off when full. The system is designed to operate on an incoming water pressure range of 140-700kPa and also features a fail-safe secondary float valve which can be re-set if activated, making it ideal for locations where water hammer and pressure spikes are a regular occourance.
Refrigeration System Ozone friendly HFC-134a refrigerant. Flow is controlled by capillary tube which has no moving parts. Condenser is air cooled static type for silent running. No fan assmbly is required. Compressor is hermetically sealed, permanently lubricated and protected against motor overload.
Thermostat Adjustible and user friendly. Readily accessible at the rear of the cabinet.
Electrical 240 Volts 50Hz single phase. A 1.8metre house cable and 3 pin plug is supplied. Full load current is 1.5 amps.
Warranty 2 Years comprehensive parts and labour warranty is supplied
Click Add to Cart to order this product.
Email: sales@naturalchoicewater.com.au with any questions about this or any of our other products.
Free Shipping (Sydney, Melbourne, Brisbane only)
Credit Cards Accepted
PayPal Accepted
Bpay Accepted
1300 131 077
Unit 3 / 78 Harley Crescent
Condell Park NSW 2200
Copyright © Natural Choice Water Pty Ltd
admin@naturalchoicewater.com.au